3 Bar MAP sensor calibration :: Cappuccino Owners Club

Welcome, Guest.

Cappuccino Owners Club › Specific Discussion Boards › Adaptronic ECU › 3 Bar MAP sensor calibration (Moderators: )

0 Members Browsing (5 Guests)
Currently No Active Members

Pages: 1

Author

3 Bar MAP sensor calibration (currently 227 views)

paolo

Posted on: Monday, July 26th, 2010, 11:41:19am

Guest User

How does one calibrate a 3 bar map sensor on WARI?

Logged

brett

Posted on: Monday, July 26th, 2010, 12:51:08pm

Guest User

Do you have the adaptronic supplied map sensor? If so this thread could be helpful: http://adaptronic.com.au/forum/index.php?topic=1085.0 The supplied values should be pretty close.

To actually calibrate it properly you can apply a vaccuum and a positive pressure of at least 3 bar with a syringe (like the type you'd use to worm a horse) or something similar and click the learn button for each value in wari under the analogue cals / tuning modes tab.

An easy way to check its pretty close is without the engine running but with ignition on the map sensor should be reading 100kpa at sea level and about 40kpa while idling.

Logged

Reply: 1 - 2

paolo

Posted on: Monday, July 26th, 2010, 1:12:02pm

Guest User

Thanks Brett

Logged

Reply: 2 - 2

Pages: 1

Cappuccino Owners Club › Adaptronic ECU [ previous | next ]

Switch to:

Quick Reply

Forum Rules

You may not post new threads
You may not post replies
You may not post polls
You may not post attachments

HTML is on
Blah Code is on
Smilies are on