|
Author |
Tiny's Resurrection of M70CAP (currently 1460 views) |
Tiny |
Posted on: Wednesday, June 1st, 2011, 2:56:28pm |
|
|
|
Well So far the little car has arrived caused the wife to drive properly (I wish i could get her to drive the RX8 like she drives this) and then promptly scared the sh*t out of everyone i have taken for a ride.
So it turns out the little car used to be owned by Dave Benson who is abit of a tuning God when it came to these little cars and suzuki pandering to the Japanese tuners market offered every available option under the sun for the cappuccino
So the currently found upgrades are Rhb31 Turbo Big equal length tubular manifold. 295cc Injectors Suzuki Sport N2 Ecu ARC Intercooler silicon hosing everywhere! SPA Design. Boost, Charge Temp, Oil Pressure, Oil Temp Gauges Nardi Steering wheel CD player relocated to glove box Suzuki Sport Roll Bar Suzuki Sport ARB kit Suzuki Sport Suspension Tarox grooved and drilled brakes and EBC Green Pads Braded Brake lines HKS SSQV Fox Racing 14' Alloy wheels Brand new with Avon tyres Magnecor KV85s and some super denso Grade 9 plugs to run cooler Custom Stainless exhaust and Decat. HKS 272in/272out cams - it idles so lumpy it sounds wrong but beautiful at the same time.
So Happy that the car is mechanically sound and its not going to blow up on me at full chat I took it out today for a spin whilst it was quiet and let the car warm up pottering about and once all the lights had gone out on the SPA gauges i stopped on this quiet piece of dual carriage way A road (4am ish just after dawn) and let rip
The world kind of blurred and then came back into focus once i had let off the throttle to change into 2nd went blurry again and then into 3rd where it went really blurry and i was just about to nudge over 70 so i let off. realizing i hadn't actually been breathing the whole time this happened looked at the iPhone which was on the Dynolicious app securely held on the center console with copious amounts of blue tac.
0-60 5.68seconds!!!! power to weight 176hp Per Tonne!
the scary thing is i had turned down the boost to .8bar as i was unsure the car would take it the first time it was driven properly back to mine having been stood for a while. It was running 1.1bar fine when Dave had it in its prime with 1.3bar available on a scramble switch on the dash for track use.
Ill post up some pics later but this thing makes my RX8 feel so slow now :p |
|
Logged |
|
|
|
|
Tiny |
Posted on: Wednesday, June 1st, 2011, 2:58:26pm |
|
|
|
PICS
I'm a giant but the car is really small!
Lovely set of spa design gauges and a racetech capillary oil pressure gauge.
Suzuki sport N2 ecu
Lots of shiney pipes and a mahoosive intercooler from IRS motorsport
You don't realise just how small this engine is until I put my iPhone on it
scroll manifold and ssqv
Idle is a little smooth as it was warming up not just ticking over at nOrmal temp i'll take a proper vid tomorrow so you can hear how lumpy it is at idle. |
|
Logged |
|
|
|
Reply: 1 - 50 |
|
|
Tiny |
Posted on: Wednesday, June 1st, 2011, 3:00:57pm |
|
|
|
So day 4 with the cappuccino I got the back end out properly today was great little flick out easily caught and just give It more loud pedal to increase the angle. I need better suspension to really hang it out there :p
Proper little comedy moment first thing when it was so cold I started the car and used a microfibre to wipe down the windows and then put the damp cloth indoors. Now being only 6'c this morning a fair bit of condensation/water vapour was coming from the exhaust and due to the lumpy idle it was popping out steam rings. It really Awesome will try to get video if it's cold enough in the morning.
Anyway the mrs finally moved out the way of the drive so I took the important comparison photo the Rex looks so fat in this photo!
And fitted the new rear number plate the old one had a crack in it and looked ratty
I moved the front number plate up By about 8 inches now the little intercooler actually gets air. My charge temps were going through the roof 45'c is not uncommon on full boost but it wasn't going down very quick or stabilising with the extra airflow so a quick move and a blast saw -10'c drop
Need some mesh there now that old stuff is really bad
I then broke out the autosol and out came the shine
And treated the exhaust too it's only 2.1/4 inches but it's 2.1/4 inches from the turbo back.
|
|
Logged |
|
|
|
Reply: 2 - 50 |
|
|
Tiny |
Posted on: Wednesday, June 1st, 2011, 3:20:23pm |
|
|
|
I did find a few things wrong
1. The washer bottle has split and gone brittle so I need a new one if possible? If anyone has a good condition bottle with pipes and motors from a breaker give me a shout cash waiting That and I'm missing loads of trim bolts in the cabin so if anyone is breaking one remove as many bolts as they can and post them |
|
Logged |
|
|
|
Reply: 3 - 50 |
|
|
Switch |
Posted on: Wednesday, June 1st, 2011, 4:13:14pm |
|
|
|
|
Logged |
|
|
|
Reply: 4 - 50 |
|
|
Tiny |
Posted on: Wednesday, June 1st, 2011, 4:20:39pm |
|
|
|
|
Logged |
|
|
|
Reply: 5 - 50 |
|
|
Switch |
Posted on: Wednesday, June 1st, 2011, 4:39:11pm |
|
|
|
Want! How much did it cost, if you don't mind me asking? |
|
Logged |
|
|
|
Reply: 6 - 50 |
|
|
Tiny |
Posted on: Wednesday, June 1st, 2011, 6:48:06pm |
|
|
|
I bought it from a member on here for a good price representative of the mods and the amOunt of work it needs |
|
Logged |
|
|
|
Reply: 7 - 50 |
|
|
rapidebrothers |
Posted on: Wednesday, June 1st, 2011, 10:55:02pm |
|
|
|
Looks like a nice little pocket rocket! Bet it shifts!! Glad your enjoying it !! Have Fun! Gav |
|
Logged |
|
|
|
Reply: 8 - 50 |
|
|
Ricou |
Posted on: Thursday, June 2nd, 2011, 4:03:52am |
|
|
Maximum Member
Posts: 1110 Posts Per Day: 0.65 |
|
Great Cappuccino, and congrats for buying it. I'm jealous of your suspension and your HKS cams (no ideas about how to find them ?)
This engine has forged pistons and conrods, right ? |
|
Logged |
|
|
|
Reply: 9 - 50 |
|
|
ycming |
Posted on: Thursday, June 2nd, 2011, 11:24:21am |
|
|
|
|
Logged |
|
|
|
Reply: 10 - 50 |
|
|
Tiny |
Posted on: Monday, June 13th, 2011, 8:54:40am |
|
|
|
Yes Ricou Its fully forged
Well I had a fun weekend and on Saturday I gave the car its first real polish and wax for probably YEARS!
well worth the results though
I also found most of the suspension dampers and top mounts are shot and despite offering a VERY good lifetime warranty as i am not the original purchaser i am not entitled to it so I went on the hunt for some new suspension for the cappo.
Enter a full set of these for £45 thanks to matt from wymondham sale rooms
I also have been having some serious doubts as to the legitimacy of the MOT certificate after finding the windscreen washers didnt work after finding this
Also one of the rear brakes kept sticking ans the suzuki sport suspension was shot and leaking. So I booked the car into a Vosa station and lets just say their is now an ongoing investigation and i have about £500 worth of repairs and upgrades to make
So the car goes into a Very good garage later this week called JD Modified its run by a good friend of mine called James Darby and he is going to be carrying out a mini overhaul for me and a total transfusion to boot.
Currently planned we have Complete hose change every hose on the engine will be replaced. Radiatior flush. and new coolant Engine Oil change Gearbox Oil change Diff Oil Change Cambelt Water Pump Ancillary belts.
New springs and dampers New Top mounts. Chassis Bracing
I have no idea how long the car was sat unused as the first few tanks i was lucky to break 180-200 miles. but i ran some injector cleaner through the tank and have been treating the car to a diet strictly comprising of V-power and Momentum 99 and the boost has been creeping higher and the mileage has been increasing and I hit 280 miles to 22 liters middle of last week and this morning i refilled at 250miles so the fuel system is definitely performing on par as the last few fill ups my MPG has been 50.97, 47.31, 56.45, 49.10, 51.2 so big improvements over the original 38 and 42mpg from the first 2 tank fulls.
|
|
Logged |
|
|
|
Reply: 11 - 50 |
|
|
rapidebrothers |
Posted on: Tuesday, June 14th, 2011, 3:48:54pm |
|
|
|
Looking good mate! What size of Tyres are you running on those wheels? How is the handling? Nice little cappuccino! Gav |
|
Logged |
|
|
|
Reply: 12 - 50 |
|
|
kayfour |
Posted on: Tuesday, June 14th, 2011, 4:28:46pm |
|
|
|
|
Logged |
|
|
|
Reply: 13 - 50 |
|
|
Tiny |
Posted on: Monday, June 20th, 2011, 1:28:50pm |
|
|
|
Well I went a little nuts and bought a few more items from Matt at Wymondham.
2.2 crux MHG gasket A short shifter kit a Long Drift black knob
Half of the full silicon Hose kit is in place I replaced the washer bottle and cleaned out the nozzle and hoses and replaced the washer motor. Does not taste Good!
I have changed the Alternator belt.....Again after an ebay seller sold me a 615 telling me it was the correct size. so i bought a 600 and now the car is really quiet again last friday was scary.
I also re-gassed the Aircon using one of those EX chill kits from Halfrauds. £38 (+£10 refund for taking back the bottle) Im half temped to keep the bottle though and use it as a CO2 bottle for an intercooler spray bar. Ice cool Cappo now .
Also i am selling the RX8 so this should free up about another £1.2k to spend on the Cappo Im thinking a set of 2nd hand wheels, a set of R'888s, Half 9s two way LSD and a set of roof seals as I have found my LSD is just a little one way and i think is Rather worn...
Thats it for now (do you now if i can remove the front center bit on the bumper or will i loose alot of structural rigidity to the bumper)? |
Last modified Monday, June 20th, 2011, 1:30:41pm by Tiny |
|
Logged |
|
|
|
Reply: 14 - 50 |
|
|
badcat |
Posted on: Monday, June 20th, 2011, 1:37:34pm |
|
|
|
nice looking ride, hope mine turns out as good |
|
Logged |
|
|
|
Reply: 15 - 50 |
|
|
Badger |
Posted on: Monday, June 20th, 2011, 3:22:06pm |
|
|
|
As long as the Bolt Mounting positions elswhere are in place, removing that centre bit wont affect it whatsoever.....I removed both of mine (2 Cappos) and have had NO PROBLEMS. Cappo looks very nice. |
|
Logged |
|
|
|
Reply: 16 - 50 |
|
|
Tiny |
Posted on: Wednesday, June 29th, 2011, 12:09:54am |
|
|
|
Cheers Sneaza.
Well since last post I have been busy buying more bits for the cappo
I have bought from wymondham a heartland front bumper, a new dipstick after breaking the top off mine. a new mirror cover and a new set of wheels from ebay
wheels i picked up from ebay earlier today 14"x6j et 25 with a 30mm drop courtesy of the teins should run almost flush with no scrubbing the wheels are nismo freshly powdercoated black and sexy as hell
I also took the car to a classic car meet this was taken quite late on when a few other cars had moved sunbeam tiger V8 turbo esprit, me, 1920s riley, v12 etype, concourse rover 3.5
was abit busier earlier
and it was exotic - this is genuine not a kit or replica !!!!!!!!!!
bought myself a new horn after being pulled out on and nearly side swiped too click for sound clip http://www.bikerhiway.com/images/stebel/nautilushorn.mp3 |
Last modified Wednesday, June 29th, 2011, 12:11:12am by Tiny |
|
Logged |
|
|
|
Reply: 17 - 50 |
|
|
Tiny |
Posted on: Friday, July 8th, 2011, 10:45:48am |
|
|
|
Well I had abit of an ebay bargain session.
picked up the new wheels and bought myself some new nuts and valve stems.
also picked up a set of Yokohama super soft A539 track tyres. with a wear ratio of 200:1! £40 FOR THE SET with 7mm tread !
Had the strut braces fitted
The fronts fouled my exhaust though so i have had to pack the bots out with some washers to get them fitted.
Disaster struck though the new wheels look amazing perfectly flush and look really aggressive whilst legal!
However the rears scrub and i mean scrub badly. May have something to do with my fat a*se and the new 30mm drop thanks to the Teins!
so im awaiting a call back to get the arches rolled and flared. I don't want to be rocking round donnington on the fox wheels and the avons they arent the best for track use.
Ill keep you posted. |
|
Logged |
|
|
|
Reply: 18 - 50 |
|
|
k1ng5ley |
Posted on: Friday, July 8th, 2011, 11:22:58am |
|
|
|
Can see from that last pic that your front bumper extension totally blocks the plastic air scoop that sticks down under the the front. I think that your heartland bumper will sort this allowing more air in where you need it. Looking good though wish it was mine. |
|
Logged |
|
|
|
Reply: 19 - 50 |
|
|
Tiny |
Posted on: Tuesday, July 26th, 2011, 10:38:27pm |
|
|
|
So a few developments I'll let you guess what they are
This should have been a heartland but I'm not complaining
These were a bargain and will really help set the car off |
|
Logged |
|
|
|
Reply: 20 - 50 |
|
|
redgaijin |
Posted on: Wednesday, July 27th, 2011, 12:38:42am |
|
|
|
Hey Tiny, where did you get the new head lights? How much? |
|
Logged |
|
|
|
Reply: 21 - 50 |
|
|
Tiny |
Posted on: Tuesday, August 2nd, 2011, 9:53:49am |
|
|
|
I got them from the Wymondham chap for £100
But since then the car has a taken a nose dive i had re routed all the piping with some blue silicon to tidy up the engine bay and to replace some possibly leaky 18 year old boost hosing and to re plumb in the HKS SSQV via the original route through the hard metal pipe through the front of the engine.
So i take the car out an i make the fundamental mistake of letting the Wife drive............tried to pull away in 4th only 2 minutes into driving with the engine at a roundabout Revs the sh*t out of the engine and rags the clutch.....Dont worry shes alive......just.
So about 20 minutes later the car feels sluggish and the car starts to make a sound like its poorly running only on 2!!!
So cars gone into my good friends garage JDModified who whipped the head off today to find the poor repair that the previous owners did (fit two gaskets instead of 1 proper thickness one!)
so wife has been told its going to be about 2k to fix. so i can get some other mods carried out too
|
|
Logged |
|
|
|
Reply: 22 - 50 |
|
|
paolo |
Posted on: Tuesday, August 2nd, 2011, 10:52:15am |
|
|
|
|
Quoted Text |
|
so wife has been told its going to be about 2k to fix. so i can get some other mods carried out too
|
|
I like your style, I'm quite partial to a few stealth upgrades myself! |
|
Logged |
|
|
|
Reply: 23 - 50 |
|
|
Badger |
Posted on: Wednesday, August 3rd, 2011, 9:30:58am |
|
|
|
|
Quoted from Tiny, posted Tuesday, August 2nd, 2011, 9:53:49am at here |
|
So i take the car out an i make the fundamental mistake of letting the Wife drive............
|
|
What were you thinking man...??? GET A GRIP!!!!! , Though I would have got your mate to ADD abit more.....expensive these parts that 'HAVE TO COME FROM JAPAN'.....
|
|
Logged |
|
|
|
Reply: 24 - 50 |
|
|
Tiny |
Posted on: Wednesday, August 3rd, 2011, 11:32:57am |
|
|
|
currently on parts alone im upto £1302 |
|
Logged |
|
|
|
Reply: 25 - 50 |
|
|
sfalshaw |
Posted on: Wednesday, August 3rd, 2011, 9:43:36pm |
|
|
|
Just found this post. I knew Dave we met when SCORE was formed in 1996 (?) he really went for it and lived life to the full. I may have some details of the work done on his car in old SCORE newsletters I'll have a look when I get back home in November! Keep up the good work on M70. Yorkie |
|
Logged |
|
|
|
Reply: 26 - 50 |
|
|
Tiny |
Posted on: Wednesday, August 17th, 2011, 9:35:33am |
|
|
|
Thanks Yorkie. I havent really been on SCORE, I think Dave was such an influence and a presence on there that i think it would be a little odd to return with his car bit like bringing a ghost back.
Onto the Car. Since my last update there have been a great many things happen
1. My current spend on Parts Alone is upto £2380 and i still need to order another 300 easily.
so far i have bought about £600 worth of parts from Suzuki GB another £500 from Monster Sport a few other little toys here and there a cusco RS LSD 2 way man diff! a Gizzmo MS2 IBC a new oil cooler a new Dash a tripple gauge pod a pair of Mx5 seats which will be sold as they give me more room front to back but not in height and im on the prowl for some Smart roadster seats. A super short shifter a Stebel Nautilus. a new set of shelf speakers. the set of bushings arrived as expected from Suzuki Sport. A follow on set of engine mounts and diff mounts have been ordered at significant saving after a rather brief but intense discussion where some legal threats were thrown about from me they agreed to a £268.43 discount on the remaining parts!
Final parts lot collected from Suzuki This morning £315! for 18 items.....
DAMN YOU LORD! for getting that stage 2 engine if i had got that i would have saved about £1K
So thats it really just got to get it all fitted now |
Last modified Wednesday, August 17th, 2011, 11:21:29am by Tiny |
|
Logged |
|
|
|
Reply: 27 - 50 |
|
|
kayfour |
Posted on: Thursday, August 18th, 2011, 2:45:26am |
|
|
|
WOWW Take-off front bumper?!?!?!
if i had known that was what the hartland one was i would of snapped it up without question =(
cant wait to see everthing fitted! |
|
Logged |
|
|
|
Reply: 28 - 50 |
|
|
lord |
Posted on: Thursday, August 18th, 2011, 9:28:35am |
|
|
|
Sorry about the engine mate... what can I say. I'm trying to build a legendary cappuccino like yourself!
when you fitting all these bad boy bits anyway? Got jammy with those lights ha ha |
Last modified Friday, August 19th, 2011, 7:13:08pm by lord |
|
Logged |
|
|
|
Reply: 29 - 50 |
|
|
Tiny |
Posted on: Tuesday, August 23rd, 2011, 11:46:29am |
|
|
|
you would win in a race i have about 50kg to shift to be competitive you dont need to buy new lash adjusters though. the bleeding proceedure turned my 12 floppy squashy bits into 12 little steel rods that barely moved!
It only just missed a trip to cornwall this weekend but im having the boost mapped this week.
I bought the GIZZMO MS2 IBC (it has 6 different boost memories a turbo timer built in and a FCd so quite a neat bit of kit.) now the question is what do it set the limits to.
bearing in mind the full rebuild and mini overhaul she has just had im thinking
0.9bar daily commuter boost 1.1bar spirited fun 1.3bar for track days/scramble settings |
Last modified Tuesday, August 23rd, 2011, 11:56:49am by Tiny |
|
Logged |
|
|
|
Reply: 30 - 50 |
|
|
Tiny |
Posted on: Wednesday, August 24th, 2011, 11:39:30am |
|
|
|
sneaky pics
|
Last modified Wednesday, August 24th, 2011, 11:44:02am by Tiny |
|
Logged |
|
|
|
Reply: 31 - 50 |
|
|
half-9 |
Posted on: Wednesday, August 24th, 2011, 11:07:39pm |
|
|
Big Member
Posts: 453 Posts Per Day: 0.32 |
|
Looks mean! Are the lights staying black? |
|
Logged |
|
|
|
Reply: 32 - 50 |
|
|
Tiny |
Posted on: Thursday, August 25th, 2011, 12:19:59pm |
|
|
|
I think so I have a black roof and a black set of wheels so im going to put them all together and then see if they need painting. But it may look awesome as they are.
|
|
Logged |
|
|
|
Reply: 33 - 50 |
|
|
Cappo |
Posted on: Thursday, August 25th, 2011, 12:45:35pm |
|
|
|
That does look very good - only suggestion would be to paint the mesh black too? |
|
Logged |
|
|
|
Reply: 34 - 50 |
|
|
Tiny |
Posted on: Thursday, August 25th, 2011, 10:28:21pm |
|
|
|
She's back. and God is she fast now! Wife hates the lights think they make the car look like some kind of jaPanese mosquito monster from a manga comic....
So not sure at the moment I'll try fitting the black roof and wheels this weekend but I think they are coming off...Rub you hands together in glee Lord
|
Last modified Thursday, August 25th, 2011, 10:31:36pm by Tiny |
|
Logged |
|
|
|
Reply: 35 - 50 |
|
|
redgaijin |
Posted on: Friday, August 26th, 2011, 4:12:23am |
|
|
|
Tiny, that looks great mate! Dont worry about the wife. She should only be concerend about what to cook you!! |
|
Logged |
|
|
|
Reply: 36 - 50 |
|
|
muggle3000 |
Posted on: Friday, August 26th, 2011, 7:31:14am |
|
|
|
Yeh, I agree Tiny. Keep the lights. They look so cool. Works well with bumper. |
|
Logged |
|
|
|
Reply: 37 - 50 |
|
|
Tiny |
Posted on: Tuesday, August 30th, 2011, 9:02:43am |
|
|
|
The Wheels and Black Roof went on.
Then it Snowed
and Got Washed
And Got Washed again
And Snowed again
And Rinsed
And thats me getting some proper weird looks from my neighbours polishing the car at nearly 10pm ready for the wings and wheels show at Dunsfold.
I believe the correct term is Hellaflush? |
|
Logged |
|
|
|
Reply: 38 - 50 |
|
|
redgaijin |
Posted on: Tuesday, August 30th, 2011, 12:28:51pm |
|
|
|
Hey Tiny. I think I got a bit of a stiffy! That looks nice mate |
|
Logged |
|
|
|
Reply: 39 - 50 |
|
|